document number acs-21b1-01 smu-2ph1 series mu vertical duplex housing for 0.9mm technical specifications seiko instruments inc. network components business 8, nakase 1-chome mihama-ku, chiba-shi, chiba-ken 261-8507 j apan telephone: +81-43-211-1211 facsimile: +81-43-211-8039
ii smu-2ph1 series mu vertical duplex housing for o 0.9mm technical specifications document number acs-21b1-01 acs-21b1-01 january 2002 copyright 2002 by seiko instruments inc. all right reserved. the information contained herein shall not be reproduced or disclosed to any third party without the express written consent of sii . the specifications contained herein are subject to change without notice. sii is a trademark of seiko instruments inc. please address any questions, comments, and suggestions to: seiko instruments usa inc. electronics components division 2990 west lomita boulevard torrance, ca 90505, u.s.a. phone: +1-310-517-7780 facsimile: +1-310-517-7792 seiko instruments gmbh ofc division siemensstra?e 9b d-63263 neu-isenburg, germany phone: +49-6102-297-0 facsimile: +49-6102-297-211 seiko instruments (h.k.) ltd. sales department 4th & 5th floor, wyler center 2 200 tai lin pai road, kwai chung n.t., kowloon, hong kong phone: +852-2421-8611 facsimile: +852-2480-5479 seiko instruments taiwan inc. sales department 4f, no.40, sec. 2, min chuan e. rd., taipei 104, taiwan, r .o.c. phone: +886-2-2563-5001 facsimile: +886-2-2521-9519 seiko instruments singapore pte. ltd. component sales department 2, marsiling lane, singapore, 739144, singapore phone: +65-269-1370 facsimile: +65-269-9729
iii table of contents section page 1. provision 1 1.1 application limit 1 2. parts number 1 3. general specifications 2 3.1 parts and materials 2 3.2 physical dimensions 2 3.3 general tolerances 2 4. packing 2 5. shipping inspection 2 table table 1 parts number 1 table 2 parts and materials 2 table 3 general tolerance 2 figure figure 1 smu-2ph1 housing 3 figure 2 h cap 4
iv
1 1. provision 1.1 application limit these specifications apply to the smu-2ph1 mu vertical duplex housing supplied by sii . 2. parts number parts number of the adaptor is shown in table 1. table 1 parts number model number type number smu-2ph1 6 0 3 b
2 3. general specifications 3.1 parts and materials parts and the materials are shown in table 2. table 2 parts and materials no. part name qty material notes c grip 1 pbt gf brown, ul94v-0 d plug frame 2 pbt gf white,ul94v-0 e spring 2 stainless steel ----------- f stop ring 2 brass nickel plating g hood 2 tpe blue,ul94v-0 h cap 2 pp white, ul94hb 3.2 physical dimensions figure 1 shows the smu-2ph1 housing. figure 2 shows the part dimensions. in accordance with iec 61754-6 fibre optic connector interfaces - part 6: type mu connector family in accordance with jis c 5983 f14 type connectors for fiber cables 3.3 general tolerances permissible deviation in dimensions without tolerance indication is in accordance with jis b 0405 class m, as shown in table 3. table 3 general tolerance (jis b 0405 class m) basic size step [mm] over under permissible deviation [mm] 0.5 3 0.1 3 6 0.1 6 30 0.2 30 120 0.3 4. ? ? packing the product is packed to prevent damage during shipment. 5. shipping inspection insertion loss of the adaptor is inspected before shipping.
3 unit: mm figure 1 smu-2ph1 housing
4 unit: mm figure 2 h cap
|
